Last Number Redial; Calling A Number From The Telephone Book; Calling A Number Out Of The Call List - Topcom BUTLER 5070 User Manual

Butler 5070
• You can now talk freely without the caller hearing you and the Mute symbol appears on the
display.
• Press OK again (within 30 sec), if you want to resume your conversation.
To activate the microphone again:
• Press OPT. key
• Select UNMUTE via the Up- and Down key.
• Press OK.
• The microphone is reactivated.
4.8.

Last number redial

The Butler 5070 saves the 10 last dialed telephone numbers in the redial memory.
• You can enter the Redial list by pushing UP KEY during stand-by mode.
• Scroll through the Redial memory via the UP- and DOWN buttons.
• When the desired number appears on the display, press the Line button.
• The number will be dialed automatically.
You can also redial a number after pressing the line button.
• Press OPT. key
• Select REDIALLING via the Up- and Down key.
• Press OK.
• Scroll through the Redial memory via the up- and down key to select the desired number.
• Press DIAL, to dial out the telephone number.
• If you want to leave the redial list, press ESC. key
4.9. Calling a number from the Telephone Book (see Chapter 6)
The telephone has a Telephone Book in which you can store 50 numbers and names.
• Press the TELEPHONE BOOK KEY (
• Scroll through the list by using the UP- and DOWN Key.
• When the selected number appears on the display, press the LINE button.
• The number will be dialed automatically.

4.10. Calling a number out of the Call List

The Butler 5070 saves the telephone numbers of the last 10 missed calls in the call list.
This is only done when the telephone number of the incoming call has been sent via the ISDN line.
• You can enter the Call List by pushing the DOWN button during stand-by mode.
• Scroll through the Call List via the UP- and DOWN keys.
• When the desired number appears on the display, press the LINE button.
• The number will be dialed automatically.
You can also dial a number after pressing the line button.
• Press the LINE key.
• Press OPT.
• Select CALLER LIST via the Up- and Down key.
• Press OK.
• Scroll through the Redial memory by means of the UP- and DOWN key to select the desired
number.
• Press DIAL, to dial out the telephone number.
• If you want to leave the caller list, press ESC.
) during stand-by mode.
73