Table of Contents
Advertisement
Topcom Butler 6040
12 Infra red
You can send and receive contact persons (V-cards 2.1 format) to/from another Infrared
device like a mobile phone or to a second handset (See "Copy entry to another handset" in
4 "Phonebook").
You can also send and receive NSM ring tones (RNG format ).
To receive infrared data you have to activate the intrared:
•
Select Menu then scroll to Handset and press OK
•
Scroll
to Activate IrDA and press OK
The phone will now be able to receive infrared signals for 2 munites. The
on the screen to indicate this.
13 Troubleshooting
Symptom
No display
No tone
The icon
flashes
Base or handset do not ring
Tone is good, but there is no
communication
Not possible to transfer a call
on PABX
Telephone does not react to
pressing the keys
32
Possible cause
Batteries uncharged
Handset turned OFF
Telephone cord badly
connected
The line is occupied by
another handset
Handset out of range
The base has no power
supply
The handset is not registered
on the base
The ringing volume is zero or
low
The dialling mode is wrong
The FLASH time is too short Set the unit to Long Flash
Manipulation error
icon will appear
Solution
Check the position of the
batteries
Recharge the batteries
Turn ON the handset
Check the telephone cord
connection
Wait until the other handset
hangs up
Bring the handset closer to
the base
Check the mains connection
to the base
Register the handset on the
base
Adjust the ringing volume
Adjust the dialling mode
(pulse/tone)
time
Remove the batteries and put
them back in place
Topcom Butler 6040
Advertisement
Table of Contents
