Additional Handsets And Bases - Topcom BUTLER 930 User Manual

Butler 930
To change the dialing mode:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Use the up or down key
• Press 'Save'
13
12.4 Base reset
You can restore all Base settings back to default.
To restore the default settings:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• Press 'Select' to confirm.
• Enter the pin code (0000).
• Press 'Reset'
13
saving.
The default settings are:
Dial Mode:
Flash time:
PIN Code:

13 Additional handsets and bases

You can subscribe up to 5 handsets on one base. Each handset can register to 4 base
stations and the user can select which base he wants to use. By default the handset 1 is
registered to the base unit 1.
13.1 Adding a new handset
This is only needed when you have deregistered a handset or when
you bought a new one.
Keep the paging key
in subscribing mode for 3 minutes. Do the following to subscribe the handset:
• Press the left 'Menu' key.
• Press the up or down key
• Press 'Select' to confirm.
• Press the up or down key
• The handset will now search for a base end when it's found the system PIN code (base
PIN code; default='0000') is asked.
• Enter the PIN code and and press 'Select'.
• The standby screen will appear when successfully registered and handset name and
number will be shown.
22
/
15
/
15
/
15 7
to confirm or press 'Back'
/
15
/
15
to confirm your selection or press 'Back'
Tone
Flash-1
0000
on the base unit pressed for 5 seconds. The base unit will stay
17
/
15
/
15
7 repeatedly until 'BS Settings' is selected.
7 repeatedly until 'Dial mode' is selected.
to select 'Tone' or 'Pulse'.
to leave the menu without saving.
5
repeatedly until 'BS Settings' is selected.
7
7 repeatedly until 'BS Reset' is selected.
repeatedly until 'Registration' is selected.
7
7 to select a base (1-4).
5 to leave the menu without
Butler 930