Table of Contents
Advertisement
4.4 ACTIVATION / DEACTIVATION OF BEEPS
The handsets can emit beeptone when a key is pressed, when the batteries are low or when
the handset is out of range.
4.4.1 Key pressed beeptone on/off
1.
Enter the menu by pressing
2.
Select HANDSET using the up
3.
Press OK
4.
Select BEEP using the up
5.
Press OK
6.
Select KEYTONE using the up
7.
Press OK
8.
Select ON to activate, OFF to deactivate
9.
Press OK to confirm.
4.4.2 Low battery
Proceed as before, but select at point 6 "LOW BATTERY" instead of "KEYTONE".
4.4.3 Handset out of range
Proceed as before, but select at point 6 "OUT RANGE" instead of "KEYTONE".
4.5 HANDSET NAME
This function allows you to personalise each handset.
1.
Enter the menu by pressing
2.
Select HANDSET using the up
3.
Press OK
4.
Select NAME using the up
5.
Press OK
6.
Enter the name
7.
Press OK to validate
While entering the name, press 'c' to delete a character and press and hold
menu without taking any modifications into account.
4.6 CHANGING THE PIN CODE
Certain functions are only available to users who know the PIN code. By default this is PIN
code = 0000.
To change the PIN code:
1.
Enter the menu by pressing
2.
Select SETUP using the up
3.
Press OK
4.
Select PIN CODE using the up
5.
Press OK
Topcom Butler 3501 Twin/Triple/Quattro
/OK
and down
keys
and down
keys
and down
keys
/OK
and down
keys
and down
keys
/OK
and down
keys
and down
keys
Topcom Butler 3501 Twin/Triple/Quattro
to exit the
17
Advertisement
Table of Contents
