Paging; Flash Button (R); Setting The Ring Volume And Melody - Topcom BUTLER 3300/Twin User Manual

Topcom Butler 3300/Twin/Triple/Quattro
The hands free receiver volume is also adjustable as above described!
5.8

Paging

When you press the Paging button
20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a
handset.
5.9

Flash button (R)

When you press the R button, also called flash or recall, the unit generates a line interruption
(of 100 ms or 250 ms). It gives you the possibility to use the special services of your
telephone provider and/or to transfer calls when you have a telephone exchange.
5.9.1 Setting the Flash time
• Press and hold the redial button
• The display will show:
'S' for 100ms
or 'L' for 250ms
• The flash time setting will disappear after 2 sec. from the display

5.10 Setting the ring volume and melody

5.10.1 Handset melody
• Press and hold the melody button
• Select the desired melody (1-9) by means of the scroll keys
number (1 - 9).
• Press again to confirm the setting
5.10.2 Handset ring volume
• Press the volume button
• The handset will ring in the current volume
• Press 1-5 or use the scroll keys
• Press '0' to turn the volume OFF
• You can turn the ringer volume of each individual handset ON or OFF
by simply press and hold the
• The base unit will never ring!
10
on the base unit, the handset emits a ringing signal for
for 3 sec.
until the current melody is heard.
in standby
to select the desired volume
key in standby.
or by entering a
Topcom Butler 3300/Twin/Triple/Quattro