Setting The Key Beeps; Key Lock; Default Settings; Caller-Id Function (Clip) - Topcom BUTLER 3100 User Manual

5.12 SETTING THE KEY BEEPS

• Press and hold the programming button
• Press '2'. Only appears on the display
• Press '1' to turn the key beeps OFF, or press '2' to turn it ON
• Press again to confirm the setting

5.13 KEY LOCK

When the keypad is locked, pressing any key will have no effect during standby (except holding the
an incoming call, you can still answer the call by pressing the Line button
normal. When the call is ended, the keypad will be locked again.
• Press and hold the
• appears on the display and the keypad is locked
• Press and hold the

5.14 DEFAULT SETTINGS

By doing a reset, all settings will be as a newly manufactured unit:
- Flash time = 100ms
- Ring melody = 1
- Ring volume = 3
- Receiver volume = medium
- Key beep ON
Also all numbers in the call list, phonebook and redial memory will be erased:
• Press the and hold the programming button
• Press and hold the Ø key until you hear the confirmation tone
• The handset is reset

6. CALLER-ID FUNCTION (CLIP)

The Butler 3100 displays the telephone numbers of incoming calls. This function is only possible if you are subscribed
to a telephone operator that provides this service. Contact your telephone provider for more information. When you
receive a call, the numbers are saved in a Call list. This list can hold 20 telephone numbers (each of max. 20 digits). If
the number is longer then 14 digits, you can press the

6.1 NEW CALLS

When you've received a new unanswered call, the CLIP symbol

6.2 CONSULTING THE CALL LIST

When you consult the Call list, you will notice that the list always starts with the last call received.
• Press the Call Log button
• Use the Up and Down
record, the Down key
• You can leave the Call list by pressing the

6.3 CALLING A NUMBER FROM THE CALL LIST

• Scroll through the Call list until the desired number is shown on the display.
• Press the Line button

6.4 ERASING A NUMBER FROM THE CALL LIST

• Scroll through the Call list until the desired number is shown on the display.
• Press and hold the delete button Ø to erase the number.
Topcom Butler 3100
until these 3 icons appears on the display
key
key again to un-lock the keypad
. The last received call is shown on the display.
buttons to scroll through the list. The Up key
will skip forward to the next record.
or 'C' button.
. The number will be dialled automatically.
. During the call, the keypad functions as
until these 3 icons appears on the display
key to show the other 6 digits!
appears on the display.
R
). When there is
R
will skip backwards to the previous
9