Calling A Memory Number; Mute Function; Setting The Volume; Paging - Topcom BUTLER 3100 User Manual

5.5 CALLING A MEMORY NUMBER

• Press the Memory button
• Press the Line button
• Press the Line button

5.6 MUTE FUNCTION

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by
your correspondent.
• Press the Mute button
appears on the display.
• Press the Mute button

5.7 SETTING THE VOLUME

During a conversation you can set the volume by pressing the Volume button
in Hi, Medium and Low.

5.8 PAGING

When you press the Paging button
helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9 OUT OF RANGE WARNING

When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal
to warn the user that he has to move closer towards the base unit.

5.10 FLASH BUTTON (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It
gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have
a telephone exchange.
5.10.1 Setting the Flash time
• Press and hold the programming button
• Press '3'. Only appears on the display
R
• Press '1' for 100ms or '2' for 250ms flash time
• Press again to confirm the setting

5.11 SETTING THE RING VOLUME AND MELODY

5.11.1 Handset ring volume and melody
• Press and hold the programming button
• Press '1'. Only appears on the display
• Press 1 to 5 to select the melody. The melody will be played ones.
• Press the volume
• Press again to confirm the setting
Remark: You can turn the ringer volume of each individual handset ON or OFF by simply press and hold
the key in standby.
5.11.2 Base volume
You can set the volume high, low or Off:
• Press and hold the paging key
• One ring will be played to hear the volume. Press and hold the paging key
• If you hear two beeps, the ringer is turned off.
8
, followed by the number of the memory location (0-9).
. The memory number will be dialled automatically.
when you want to terminate the call.
during a conversation. The microphone will be deactivated. The MUTE symbol
again when you want to continue the conversation.
on the base unit, the handset emits a ringing signal for 30 seconds. This signal
until these 3 icons appears on the display
until these 3 icons appears on the display
key repeatedly to adjust the ringer volume
. You can set the volume alternatively
R
R
again to select another volume.
Topcom Butler 3100