Modular Closets Cubby Insert 18" Assembly And Installation Instructions page 3

ASSEMBLY AND INSTALLATION INSTRUCTIONS
CUBBY INSERT - 18" / 24" / 30"
3A
For installation in Cubby Unit or lower
compartment of Shelf Tower Unit:
3.1
Insert Vertical Support (A) into compartment in Unit.
3.2
Make sure cutouts in Vertical Support engage Rear Cleats
in Unit and front edge of Support is flush with front of Unit.
3B
For installation in upper compartment
of Shelf Tower Unit:
3.1
Insert Vertical Support (A) into compartment in Unit.
3.2
Make sure upper cutout in Vertical Support engages
Rear Cleat in Unit and front edge of Support is flush
with front of Unit.
A
A