Maytag Ice2O Series Use & Care Manual page 29

Troubleshooting
Water droplets form • Humidity levels are high or door has • See pages 10 and 11 to adjust your controls.
on inside of been been opened frequently. • Reduce time door is open.
refrigerator • Organize food items efficiently to assure door is
open for as short a time as possible.
• Check gaskets for proper seal. • Clean, if necessary, according to the chart on
page 22.
Refrigerator or ice • Normal operation. • See page 26 for Operating Sounds.
maker makes
unfamiliar sounds
or seems too loud
Crisper drawers • Contents of drawer or positioning of • Reposition food items and containers to avoid
do not close freely items in the surrounding compartment interference with the drawers.
could be obstructing drawer.
• Drawer is not in proper position. • See page 17 to verify drawer positioning.
• Refrigerator is not level. • See page 4 for details on how to level your
refrigerator.
• Drawer channels are dirty or need • Clean drawer channels with warm, soapy water.
treatment. • Rinse and dry thoroughly.
• Apply a thin layer of petroleum jelly to drawer
channels.
Refrigerator runs
too frequently
• Doors [lave been opened frequently or
for long periods of time.
• Reduce time door is open.
• Organize food items efficiently to assure door is
open for as short a time as possible.
• Allow interior environment to adjust for period the
door has been opened.
• Humidity or heat in surrounding area • Normal operation.
is high.
• Food has recently been added. • Allow time for recently added food to reach
refrigerator or freezer temperature.
• Refrigerator is exposed to heat by • Evaluate your refrigerator's environment.
environment or by appliances nearby. Refrigerator may need to be moved to run more
efficiently.
• Condenser coils are dirty. • Clean according to tile chart on page 22.
• Controls need to be adjusted. • See pages 10 and 11 to adjust your controls.
• Door is not closing properly.
• Refrigerator is not level. See page 4 for details on
[low to level your refrigerator.
• Check gaskets for proper seal.
• Clean, if necessary, according to the chart on
page 22.
• Check for internal obstructions that are keeping
door from closing properly 0.e. improperly closed
drawers, storage bins, oversized or improperly
stored containers, etc.]
• Normal operation • See Operating Sounds on page 26.
28