Advertisement
ASSEMBLY INSTRUCTIONS CONTINUED
3.
Slide the Necklace Bracket (#18) from the
upper Upright & Rocker (#2) and then insert
the Computer Shelf (#10) into Upright &
Rocker. First insert Bolt (#69), Washer (#70,
77), leave them finger tight until all are in
place, and then tighten them with the
Wrench.
4.
Smear Lubricant (#165) onto the
spacer in the axis of Frame (#1) and
Pedal Assembly (#5, 6). Attach the
rear Pedal Assembly to Frame with
Bolt (#38), Washers (#77, 17),
Bushing (#39) then cap the Screw
Cover (#37).
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
8
• Phone 949-206-8152 • Fax 949-206-0013
Hide quick links:
Advertisement
