Advertisement
Health Index Test Function
NOTICE: This function can be used only after Run End is displayed in the matrix
window.
This function can calculate the health index based on the variance of heart rate in
one minute after exercise. If the heart rate has no change in one minute, then the
health index will be 6. If the heart rate recovers (decreases) more, then the index
number will be smaller, that is to say you are healthier.
Operation Method: In Run End mode, the matrix window displays Run End. First,
make sure that the heart rate signal blinks and the heart rate number is displayed
by gripping the pulse rate sensors on either side of the console. Then press
PULSE Recovery key. After you press the PULSE Recovery key, the matrix
window will display "Rec" and then count down for one minute. If there is no heart
rate signal input, the matrix will display "Rec" and "Error" to show that the test
fails. If the test succeeds, after one minute the Work Level window will display the
initial tested heart rate number, the RPM window will display the last tested heart
rate number, then the Distance window will display the variance between the
above two numbers. The matrix window will display " Rec " and the health index
and then come back to the Start/Ready status after several seconds.
Temperature Function
NOTICE: This function can be used only under Start/Ready mode.
Operation Method: Under Start/Ready status, if you press PULSE Recovery key,
the RPM window will display the room temperature, and display °F for
Fahrenheit unit, °C for Celsius unit. After 5 seconds, it will come back
to the Start/Ready display.
BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
OPERATION CONTINUED
18
• Phone 949-206-8152 • Fax 949-206-0013
Hide quick links:
Advertisement
