When trouble shooting a system it is very important to
remember the following:
HIGH VOLTAGE, Electrical Shock and or
G
WARNIN
Death can occur if safety is not your #1 priority.
Main Electrical Service is normally 480 VAC
Control Voltage is 120 VAC or 24VDC
Use Caution When Servicing This Unit
G
WARNIN
ONLY Qualified Electricians Should Attempt
Any ELECTRICAL Service.
Always disconnect electrical service before attempting service
G
WARNIN
on any items found within this skid.
Servicing of equipment should be completed only in a well
G
WARNIN
ventilated area.
Most Items located on the skid are Very Heavy.
G
WARNIN
Use all appropriate lifting methods and safety precautions
while lifting or moving items.
In case of Fire, use appropriate notification methods of local
fire departments and facility personnel. Turn OFF all power
G
WARNIN
sources immediately.
DO NOT operate the pump motor if the safety guard has been
G
WARNIN
removed from its fan.
DO NOT operate any motor or electrical device on this skid in
G
WARNIN
the presence of standing water or direct rain.
1.0 WARNINGS & PRECAUTIONS
6
Need help?
Do you have a question about the CHC Series and is the answer not in the manual?
Questions and answers