EcoWater CHC Series Service And Troubleshooting Manual page 116

SET UP Screens
This Section is currently being rewritten
Other Screens
SYSTEM Screen
Alphanumeric Input Screen
The System Screen can be accessed while indicting the First Set UP
screen.
While this first Set Up screen is shown (Select Language screen), if
the F2 key is pressed the System screen will appear. Within this
screen you have the option of selecting several settings that may be of
interest. Use the up and down buttons to move the cursor over your
desired setting and press the return button to enter that settings
screen. Settings of interest may include the CONTRAST screen
where you can change the contrast of the LCD, as well as the
Removable Media Setting, that allows you to format, save, or Update
the systems software with the use of the Micro SD card.
Contact EcoWater CHC Service for more information if needed about
the System
This screen automatically appears if you select any of the boxes on the
screens that require an input. (Bleed Set Point, Passcode, Help Set Up,
Controller Set Up, etc.
You can select the appropriate input by pressing the corresponding
keys. Once the input is correct press the return soft key and the input
value will appear in the box you first pressed.
You can use the Left and Right soft keys to move the cursor over an
area you need to correct on you input value, or you can press the
ESCape soft key to return to the previous screen without an input
value.
116