Table of Contents
Advertisement
4.1.3
Attach External
Antenna Step-by-Step
4.2
Battery Power System
26
5.
Insert the battery back into the battery compartment.
6.
Reattach the compartment cover by inserting it bottom first. Close
the battery compartment until it clicks into place. The release lever
jumps back to the position "locked".
Attaching the AS10/AS05 Antenna to the Zeno 20
1
009334_001
1.
Connect the antenna cable to the AS10/AS05 antenna.
2.
Open the protector cap of the external antenna connector on the left
side of the Zeno 20 device.
3.
Plug the antenna cable into the external antenna connector.
☞
If you use Zeno Field, Zeno Connect or Zeno Mobile,
attaching the antenna cable automatically sets the external
antenna as the currently used antenna. If you detach the
antenna cable, the internal antenna is used again auto-
matically.
Batteries
The Zeno 20 device is designed to work with one removable battery placed
inside the battery compartment. An internal backup battery is also included,
which allows to hot-swap the removable battery while the device is running.
The fully charged battery provides several hours of battery life.
2
3
Operation
Advertisement
Table of Contents
