Table of Contents
Advertisement
Accuracy of Measured Points
When using the combination of Zeno 20 and Disto S910, the accuracies of the
points measured with the Disto S910 depend on different variables. To ensure
high point accuracies, keep in mind the following principles:
1.
The farther away the reference point that you measure for your orienta-
tion, the better the resulting point accuracies. Make sure that the refer-
ence point is at least 25 m away from your current position.
2.
When measuring new points with the Disto S910 that are far from your
current position, the point accuracy decreases.
3.
The better the accuracy of the reference point and of the current position,
the better the resulting point accuracies. When measuring points with
GNSS, make sure that you measure with highest possible accuracy, for
example with open sky conditions and averaging of at least 10 seconds.
32
Operation
Advertisement
Table of Contents
