Page 1
Leica Zeno 20 Windows Embedded Handheld User Manual Version 1.1 English...
Page 2
Bluetooth SIG, Inc. • SD Logo is a trademark of SD-3C, LLC. All other trademarks are the property of their respective owners. Validity of this This manual applies to the Windows Embedded Handheld version of the Leica Zeno 20 manual device. Available...
Page 3
Service Description myProducts Add all Leica Geosystems products that you and your company own. View detailed information on your products, buy additional options or Customer Care Packages (CCPs), update your prod- ucts with the latest software and keep up-to-date with the latest documentation.
4.2.2 Changing the Battery 4.2.3 Charging the Battery Power Functions Connecting the Zeno 20 to PC via Windows Mobile Device Center Optimising the Zeno 20 for GNSS Tracking Setting up the Zeno 20 with a Disto S910 Software Today Screen...
Page 5
Care and Transport Transport Storage Cleaning and Drying Technical Data Zeno 20 Technical Data Conformity to National Regulations Dangerous Goods Regulations Software Licence Agreement Zeno 20 Windows Embedded Handheld, Table of Contents...
Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Zeno 20 Windows Embedded Handheld, Safety Directions...
Additional Advice • The Zeno 20 is essentially an enhanced PDA (personal digital assistant) used in geospatial applications. This device is to be used for data logging and data commu- nication for industrial applications only and not for domestic consumer applica- tions.
• To ensure that it is used in accordance with the instructions. • To be familiar with local regulations relating to safety and accident prevention. • To inform Leica Geosystems immediately if the product and the application becomes unsafe. • To ensure that the national laws, regulations and conditions for the operation of e.g.
Page 9
Precautions: Make sure that the battery terminals do not come into contact with metallic objects. Only Leica Geosystems authorised service workshops are entitled to repair these prod- WARNING ucts. ...
WARNING Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment may be disturbed. The product is a class A product when operated with the internal batteries. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Precautions: Although the product meets the strict regulations and standards which are in force in this respect, Leica Geosystems cannot completely exclude the possibility that other equipment can be disturbed or that humans or animals can be affected. • Do not operate the product with radio or digital cellular phone devices in the vicinity of filling stations or chemical installations, or in other areas where an explosion hazard exists.
Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Zeno 20 Windows Embedded Handheld, Safety Directions...
Page 13
:(1) Ll'appareil ne doit pas produire de brouillage. (2) L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Zeno 20 Windows Embedded Handheld, Safety Directions...
Description of the System Overview Zeno 20 General The Zeno 20 is a compact, high performance, low weight device with an integrated Description high accuracy GNSS, designed for outdoor & fieldwork usage. The Zeno 20 can with- stand severe environmental conditions including vibration, shock, moisture and temperature variations.
Zeno 20. This User Manual only describes the Windows Embedded Handheld version of the Zeno 20. For more information about the other version refer to the respec- tive User Manual. The Zeno 20 is delivered with the operating system and software that you ordered.
The delivered Leica Geosystems USB flash drive contains system software and is not certified for permanent data transfer i.e. as data storage for measure- ment data. Use only certified industrial grade USB flash drives such as the Leica MS1 (order number 765199).
Micro USB Host Port, works also as Power Socket 009318_001 Battery Compart- ment a) Battery Connectors b) SIM Card Slot c) MicroSDHC Card Slot d) Latch for Battery Pack 009319_001 Zeno 20 Windows Embedded Handheld, Description of the System...
Direction Pad DOWN Press to open camera app. Press to open camera app. If camera app is opened: If camera app is opened: Press to take a picture. Press to take a picture. Camera Key Zeno 20 Windows Embedded Handheld, User Interface...
Power Off, Soft Reset or Hard Reset. Select Cancel to close the Shut-Down menu and return to normal opera- tion. Refer to "5.4 Resetting the Zeno 20 Device" for more information about reset- ting the Zeno 20.
LED Indicators on Zeno 20 LED Indicators a) Battery LED b) GPS LED 009326_001 Status of the LED The Zeno 20 device has Light Emitting Diode indicators. They indicate the basic status Indicators of the device. Status of LED Description Battery LED Batteries are in use (discharging).
009802_001 Step Description Ensure that the display of the Zeno 20 is free of dust and grease. The non-reflecting display foil (b) has a carrier foil (a) with the name of the foil printed on it. Peel away the carrier foil from the display foil.
Page 22
The slots for the SIM card and the SD card are inside the battery compart- ment of the Zeno 20. Turn off the Zeno 20. Push the release lever on the back side of the Zeno 20 to the position “unlocked” and remove the cover of the battery compartment. Remove the battery.
Batteries Battery Power The Zeno 20 device is designed to work with one removable battery placed inside the System battery compartment. An internal backup battery is also included, which allows to hot- swap the removable battery while the device is running. The fully charged battery provides several hours of battery life.
Ensure that the handheld is put into stand-by mode. Place the Zeno 20 on a stable surface, with the back side facing up. While pushing the release lever to the position “unlocked”, open and remove the cover of the battery compartment.
Only use the charger delivered with the Zeno 20. Similar to a smartphone, the Zeno 20 switches on automatically when you attach it to a power adapter. While charging, the device cannot be switched off. To reduce the charging time, turn off GPS.
Turning the Zeno 20 Step Description On: Step-by-step Place the Zeno 20 on a flat and stable surface or hold the device in your hand. Ensure that either the device is connected with the AC power adapter or the batteries are charged up.
If an SD card is inserted into the Zeno 20 and the device is connected to a computer, you can also access the data stored on the SD card. Optimising the Zeno 20 for GNSS Tracking...
Zeno 20. 009345_001 For more information on how to use the Zeno 20 with a Disto S910, refer to the respective software documentations. Accuracy of Measured Points When using the combination of Zeno 20 and Disto S910, the accuracies of the points measured with the Disto S910 depend on different variables.
Description Wi-Fi connection in progress Wi-Fi is activated Bluetooth connection in progress Bluetooth is activated 008572_001 Phone is deactivated No Phone connection No SIM card inserted 008571_001 Volume ON Volume OFF Vibration mode 008573_001 Zeno 20 Windows Embedded Handheld, Software...
Select a key from the list for which you want to define a specific function. To assign an application to the selected key, tap on Open... and select an application. To exit the window, tap OK in the command bar or press the OK key on the keypad. Zeno 20 Windows Embedded Handheld, Software...
Step Description ating System Step- A reinstallation of the operating system deletes all files on the Zeno 20. by-step Backup all important data before starting a reinstallation! After reinstallation, you need to download licenses and software files from myWorld and install them again.
Hard Reset: A hard reset deletes all files on the Zeno 20. Backup all important data before performing a hard reset! After a hard reset, you need to download licences and software files from myWorld and install them again.
To save the new SSID, tap on OK in the command bar. The new SSID is displayed in the list within the Config tab. Select the SSID and tap on the Connect button. Within the Status tab, the connection status is displayed. Zeno 20 Windows Embedded Handheld, Software...
3)To select the image file that you want to install as start-up screen, tap on Open and browse for the file in the respective folder. To switch back to the default Leica start-up screen, tap on Delete Logo. Zeno 20 Windows Embedded Handheld, Software...
Shipping When transporting the product by rail, air or sea, always use the complete original Leica Geosystems packaging, transport container and cardboard box, or its equivalent, to protect against shock and vibration. Shipping, transport When transporting or shipping batteries, the person responsible for the product must...
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables. Connectors with Wet connectors must be dry before attaching the dust cap. dust caps Zeno 20 Windows Embedded Handheld, Care and Transport...
Zeno 20 Nominal voltage 5 V DC ( Internal battery Type Battery Voltage Capacity Operating time, typical Zeno 20 Li-Ion 3.7 V 7800 mAh Operating time depends on use of wireless communication devices. Zeno 20 Windows Embedded Handheld, Technical Data...
Page 38
NMEA-0183 (GGA, VTG, GLL, GSA, GSV, RMC, GST, GGQ, LLQ) via Zeno Connect on WEH or position provided by Android Location Service via Zeno Connect on Android Real-time protocols: RTCM 2.x, RTCM 3.0, RTCM 3.1, Leica, CMR, CMR+ Update rate: 1 Hz (1 s) Optional: 5 Hz (0.2 s)
• FCC Part 15, 22 and 24 (applicable in US). national regulations • Hereby, Leica Geosystems AG, declares that the Zeno 20 and the Zeno 20 are in compliance with the essential requirements and other relevant provisions of Direc- tive 1999/5/EC and other applicable European Directives. The declaration of conformity may be consulted at http://www.leica-geosystems.com/ce.
Leica Geosystems has developed Guidelines on “How to carry Leica products” and “How to ship Leica products” with Lithium batteries. Before any transpor- tation of a Leica product, we ask you to consult these guidelines on our web page (http://www.leica-geosystems.com/dgr) to ensure that you are in accord- ance with the IATA Dangerous Goods Regulations and that the Leica products can be transported correctly.
Leica Geosystems. Such software is protected by copyright and other laws and its use is defined and regulated by the Leica Geosystems Software Licence Agreement, which covers aspects such as, but not limited to, Scope of the Licence, Warranty, Intellectual Property Rights, Limitation of Liability, Exclusion of other Assurances, Governing Law and Place of Jurisdiction.