Table of Contents
Advertisement
Item
Setting
Services >
Receiving
E-mail >
Protocol
Defaults >
Incoming
From
E-mail Print
Address >
Options
Edit
Print Delivery
Confirmation
E-mail
Connectivity >
IP Address /
Protocols >
Host Name &
POP3 Setup
Port
POP Receive
Password
Encryption
Login Name
Password
Polling
Interval
Description
Specify the e-mail receiving
protocol.
Configure this setting when
printing the e-mail header
and message along with the
document attached to
received e-mail. Specify
[Attachment, Full Headers &
Message] to print the receive
routing of the e-mail, etc.
Specify whether or not
delivery receipt e-mail
should be printed.
Specify the IP address of the
POP3 server for receiving e-
mail, the IPv6-addr format,
or FQDN (Fully Qualified
Domain Name).
Specify the port number
used by the POP3 server.
Select the [APOP
Authentication] check box to
use APOP for POP receive
verification.
Set the login user name for the
POP3 server. Only one user
can be specified.
Specify the password for the
POP user name, and re-enter
the same password into
[Retype Password].
Specify the interval for
polling the POP3 server for
mail.
3.12 Printing Using E-mail - E-mail Print -
Available
Receiving
Settings
Protocol
SMTP
• SMTP
• POP3*
• Print
Attachment
Only
• Print
Attachment
& Message if
it exists
• Attachment,
Basic
Headers &
Message*
• Attachment,
Full Headers
& Message
• Off*
• On
• Print when
delivery fails
Alphanumeric
characters plus
period (.) and
hyphen (-); up
-
to 128 bytes
1 ~ 65535
• Cleared:
Disabled*
-
• Selected:
Enabled
ASCII graphic
characters
(codes 33 to
-
126); up to 64
bytes
ASCII printable
characters
(ASCII graphic
characters plus
-
space; codes
32 to 126); up
to 64 bytes
1 to 120
minutes
-
10 minutes*
POP3
-
-
97
Hide quick links:
Advertisement
Table of Contents
