Fuji Xerox DocuPrint 3105 User Manual page 74

Item
Connectivity >
Protocols >
SMTP Server
98
3 Printing
Setting
SMTP Server Specify the IP address of the
IP Address / POP3 server for receiving e-
Host Name mail, the IPv6-addr format,
or FQDN (Fully Qualified
Domain Name).
Also specify the port number
used by the SMTP server.
• IPv4
Input data in the form of
xxx.xxx.xxx.xxx. xxx
indicates numeric values
between 0 and 255.
• IPv6
Input data in the form of
xxxx:xxxx:xxxx:xxxx:xxxx:
xxxx:xxxx:xxxx. xxxx
indicates values in
hexadecimal.
• When inputting the wrong
data, re-enter it by
pressing <Clear>button.
Port Number Specify the port number
for sending E- used by the SMTP server for
mail sending e-mail.
Port Number Specify the port number
for receiving used by the SMTP server for
E-mail receiving e-mail.
SSL/TLS Specify the SSL/TLS
Communication communication for SMTP.
Machine's E- Specify the printer's e-mail
mail Address address.
Any name can be specified
for the account (Left side of
@ mark) in case of SMTP
reception. Specify combined
values of the host name and
domain name for the
address (Right side of @
mark). Alias cannot be
specified.
• Account Name: mymail
• Host Name: myhost
• Domain Name:
example.com
E-mail address for the above
example is
mymail@myhost.example.com.
Login Specify the authentication
Credentials method for the SMTP server.
for the
Machine to
access the
SMTP Server
to send
automated e-
mails
Description
Alphanumeric
characters plus
period (.) and
hyphen (-); up
to 128 bytes
1 ~ 65535
1 ~ 65535
•Disabled*
•STARTTLS
(If Available)
•STARTTLS
•SSL/TLS
Characters
allowed for e-
mail
addresses; up
to 128 bytes
• None*
• POP before
• SMTP AUTH
Available Receiving
Settings Protocol
SMTP





SMTP

POP3
-

-

-
-