Basic Operation - Fuji Xerox DocuPrint 3105 User Manual

2

Basic Operation

2.1 Main Components and Functions
Main Unit
Front and right side of views
Note
• The illustrations in this guide show the printer with the Duplex unit and 3 Tray Module installed.
No. Name
1 Center tray (standard)
2 Control panel
3 Right cover
4 Accessory installation stand
mount
5 Bypass tray (standard)
6 Paper tray 1 (standard)
7 Size indicator
8 Power switch
9 Extension tray
10 Paper trays 2 and 3 (optional)
44
2 Basic Operation
Delivers printed output face down here.
Switches the printer on/off.
Refer to
• " Control Panel" (P. 47)
Remove this cover when installing the optional extension system memory or
parallel port kit (optional).
Remove this cover when installing the optional accessory installation stand
mount. The IC card reader can be placed on the accessory installation stand.
Open this cover to load paper.
Pull out this tray to load paper.
Set here the label indicating the size of the paper set in the paper tray.
Switches the printer on/off. Press the < | > side of the power switch on the
printer to turn it on, and press the < > side to turn it off.
Refer to
• "2.2 Switching On/Off the Power" (P. 50)
Pull out this tray when the printing paper is A4 portrait or larger than A4 size.
Up two trays identical to tray 1 can be added.
10
Description