Siemens SIMATIC S7-1500 Operating Instructions Manual page 98

Reference information
A.1 Permitted commands / parameters
Parameters in the Backup and Restore Tool
To be able to use the parameters, start the Diagnostics Tool with "./s7_restore_tool".
Parameter
-i
-d
-b
-f
-r
-o
-y
-v
-h
-V
98
Description
--image Path to the base image that is used.
--device Target hard disk.
--backup Create a backup of the selected device.
--factory Reset factory setting to base image.
--restore Restore device with the selected image.
--overwrite Overwrites the existing configuration during the recovery.
--yes Click "Yes" to confirm prompt.
--verbose Enables verbose mode.
--help The help and an example of how to use the tool are displayed.
--version Displays information about the current version.
CPU 1505SP (F) Ready4Linux Version 2.7
Operating Instructions, 05/2019, A5E46864285-AA