Section B3 - Connecting Perimeter Channel Via A 1.5"/40Mm Inlet Pipe - Delta Dual V4 Installation Instructions Manual

11.0 Installation of Chamber - Section B3
Connecting perimeter channel via a 1.5"/40mm inlet pipe
13
Mark position of the 40mm pipe on the side of
the chamber and cut out the marked line using a
1.5"/40mm holesaw.
15
Saw off 110mm socket end/s to be used.
For technical support, please call 01279 757400
14
Cut 40mm pipe to length allowing an overhang of
35mm inside the chamber.
16
Attach a DMS-341 adaptor to the 40mm pipe and
connect the adaptor to the chamber via a 110mm
push fit coupler.
Delta Dual V4/V6
13