Presto Conti Compact Series Operating And Maintenance Instructions Manual page 70

PRESTO
GmbH & Co. KG
Bad Laer
• Irrespective of the achieved number of
operating hours an oil change has to be
carried out at least once a year.
• Combine the oil change with a proper
cleaning of the installation area around
the aggregate.
• Screw out tank ventilator (60).
• Screw out the sealing cap (61) of
the oil filter and remove the filter
element.
• Pump the waste oil out of the oil
filter opening into an appropriate
vessel.
• Fill new hydraulic oil into the
control opening. The oil level is
correct if the distance between the
liquid level and the upper edge of
the screw in opening does not
amount to more than 4-5 cm.
Oil sight glass
• You will find information with regard to
the hydraulic oil in the section "Operating
fuels, specifications".
• Reinstall the new filter element and the
new ventilation filter.
• Continue with the maintenance point
"Replace filter insert".
04/2012 7 - 16