Presto Conti Compact Series Operating And Maintenance Instructions Manual page 15

PRESTO
GmbH & Co. KG
Bad Laer
Entering the shaft of the
channel-type baling press is
strictly prohibited.
Before taking the unit into operation make
sure that nobody will be endangered.
Watch turn-on transient and turn-off
transient as well as control lamps according
to operating instructions.
User - decide responsibility.
Enable the user the refusal of instructions
from third parties that impair safety!
Ensure that only authorised persons are
working at the machine. Please keep persons
who are not involved in the work process in a
distance.
The staff may not wear long loose hair, loose
clothes or jewellery including rings. There is a
considerable danger to be injured, for
example by getting caught or being trapped.
Switch off machine when having finished the
work and secure against unauthorised
reclosure (lock main switch).
Comply with adjustment and maintenance
work instructions for the replacement of
parts / part equipment.
This work may be performed by skilled
personnel with sufficient knowledge and
corresponding tools, only.
As far as necessary or if required by legal
provisions use personnel protective
equipment!
Observe protection against accidental risks
(Guideline of the council 2001/45/EC).
at places where there are solid airborne
particles or where dusts, caustic substances
or the like are processed or produced.
It is prohibited to erect platforms, ladders or
other aids.
If there is no possibility of supervision, the
operation has to be locked by the actuation
of the main switch that can be locked by a
key.
The cover to the cylinder room may be
opened for the purpose of cleaning,
maintenance or repair only. For this purpose
the channel-type baling press has to be
disconnected from the power supply.
Additionally the main switch has to be put
into "0" position and be secured against
unauthorised interference by means of a
padlock. After having finished the work care
has to be taken that the flap is mounted
again correctly.
When using oils, grease and other
substances, adhere to the safety regulations
and legal provisions valid for the product!
An immediate interruption by the user is
absolutely necessary if defects occur, which
impair the safety.
04/2012 3 - 8
Wear protective gloves!
Use eye protection!