Presto Conti Compact Series Operating And Maintenance Instructions Manual page 62

PRESTO
GmbH & Co. KG
Bad Laer
Safety switch, bottom area
• The unit is out of operation at the
beginning of the inspection. For this
inspection you will need a person who
has been instructed in the operation of
this machine and the test sequence prior
to the inspection.
• The second person opens the flap in the
rear area at the bottom side of the unit.
The flap has to be kept open with a metal
pin, e.g. a screwdriver.
Attention! Never use the
hands! Danger of crushing!
• Put main switch into position "I",
Emergency- off pulled and unlocked.
• Put operation mode selector in "Auto"
position.
• Press "Operation" key.
• Press start key in order to test the proper
function of safety switch (22)..
• The function test is ok if the machine
does not start up.
• Close the flap after the function test.
22
Pull cord switch, check function
• The unit is out of operation at the
beginning of the inspection.
• Press the reset button of the pull cord
switch until it clicks into place.
• Now pull the pull cord (23) until you can
hear how the switch clicks into place.
• Put main switch in "I" position,
emergency-off pulled and unlocked.
• Put operation mode selector in "Auto"
position.
• Press "Operation" key.
• Press "Start" key in order to test the
proper function of the pull cord switch
(24).
• The function test is successful if the
machine does not start up.
Re-establish the condition of the unit in the
same way as prior to this function test.
04/2012 7 - 8