Keysight Technologies M937 A Series Startup Manual page 19

Getting Started
STEP 4. Install the Network Analyzer Modules
15.Install a semi-rigid cable (M9370-20019), seen in
Figure 1-10 Installing Semi-Rigid Cable M9370-20019
Use the supplied cable removal tool (5002-3361) to remove the M9370-20019 cables if
NOTE
necessary. See
You have now completed the hard ware installation proced ure.
Ref Out port and the Ref In port on each of the module pairs (1 & 2, 2 & 3, 3
& 4, 4 & 5, 5 & 6, 6 & 7, and 7 & 8).
Figure 1-8 on page 18.
19
Figure 1-10, between the