Getting Started
STEP 3. Install the Software
Software Installation Procedure
1. Install the Keysight IO Libraries Suite, using either the Keysight IO Libraries
2. Install the network analyzer module software:
3. Complete the installation:
Check for software updates at: http://na.support.keysight.com/pxi/firmware.
NOTE
Suite CD included with your shipment (CD part number E2094-60003), or
the downloadable file at
installer prompts to install the IO libraries.
a. Using either the CD included with your shipment (CD part number
M9370-90003) or the downloadable file at
http://na.support.keysight.com/pxi/firmware,
b. Follow the installer prompts.
If Using an Embedded Controller:
a. After the InstallShield Wizard has completed, click Finish.
b. Restart the embedded controller PC, using Start > Restart, and wait for
the system to restart.
If Using a Remote Controller:
a. After the InstallShield Wizard has completed, click Finish.
b. Shut down the remote controller PC, using Start > Shut down.
c. Power down the chassis.
d. Power up the chassis.
e. Power up the remote controller PC.
www.keysight.com/find/iosuite.
11
Follow the
launch the installer.