Declaration Of Conformity; Note For Usa (Fcc); Note For Canada (Ic); Explication Of Warning Symbols - IKA RC 5 control Operating Instructions Manual

We declare under our sole responsibility that this product corresponds to the regulations 2014/35/EU, 2006/42/EC, 2004/108/
EC and 2011/65/EU and conforms with the standards or other normative documents: EN 61010-1, EN 61010-2-010,
EN 61326-1, EN 60529, EN ISO 12100 and DIN 12876-1.
Bluetooth ® module:
Directive: 2014/53/EU
This equipment complies with Part 15 of the FCC rules. Any changes or modifications not expressly approved by the
Manufacturer could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC
rules subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept all interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This device complies with Health Canada's Safety Code 6/IC RSS-210. The installer of this device should ensure that RF radiation
is not emitted in excess of the Health Canada's requirement.
DANGER
WARNING
CAUTION
NOTICE
WARNING
WARNING

Declaration of Conformity

Standards: EN 300328, EN 301489-17, EN 301489-1, EN 60950-1

Note for USA (FCC)

Note for Canada (IC)

Explication of warning symbols

Indicates an (extremly) hazardous situation, which, if not avoided, will result in death,
serious injury.
Indicates a hazardous situation, which, if not avoided, can result in death, serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, can result in injury.
Indicates practices which, if not avoided, can result in equipment damage.
Indicates the risk of fire or explosion!
Indicates crushing risk to fingers/hand.
Warning: flammable material!
4