• Moving the device:
Empty all fluid in the bath before move device from one
place to other place.
The device must be lifted by two persons with the upper
handles.
It can also be moved on flat surface by lifting and push-
ing the front of the device. It is easy to move the device
with the help of the rolling of the wheels.
The angle of inclination should never more than 10 º at
any direction when move the device!
Note: The device must not be moved during operation.
After moving the device, you must wait for at least one
hour before restarting the unit.
• Charging the Battery Pack RB 1 (rechargeable battery):
The battery pack in the WiCo can be charged by any of the following means:
- On the station
- Via a USB cable at the PC or station
- Via an OS 1.0 power supply unit.
• Replacing battery to WiCo:
1
Fig. 14
Notice: Please comply with the relevant safety instructions in the "Safety instructions" section for the RB 1 battery pack!
• WiCo – holder WH 10:
Fig. 15
WiCo – holder WH 10
WiCo – holder WH 10
Fig. 13
WiCo – holder WH 10
max. 10˚
H 44
Boss head clamp
H 38
Holding rod
12
Need help?
Do you have a question about the RC 5 control and is the answer not in the manual?