Getting Started - Motorola CD5011 Quick Start Manual

2.

Getting started

Connecting the base
1. Plug the telephone line cord into the socket marked
base. Plug the other end of the telephone line cord into the telephone wall
jack.
2. Plug the AC power jack into the socket marked
and the AC power adaptor into the AC power outlet.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the
rechargeable Ni-MH battery cells supplied. Please note the '+' and '-'
markings inside the battery compartment and insert in the correct direction.
2. Slide the battery cover back into place.
LINE
on the rear of the base
1
Press
down
3
on the rear of the
2
Slide