Using The Phone - Motorola CD5011 Quick Start Manual

5.

Using the phone

5.1 Calls
5.1.1 Using the handset
Make a call
Press t.
1.
2. Dial the telephone number.
Pre-dial
1. Enter the phone number
(maximum 24 digits). If you make a
mistake press Clear.
2. Press t to dial the phone number
entered.
3. Press t again to dial over hands-
free.
Memory numbers
@
!
1. Press , or
(or name if stored in the contacts
list) is displayed and dialed
automatically.
Adjust volume
1. During a call, press
to adjust the earpiece or hands-
free volume. The level is shown in
the handset display.
2. You can also amplify the earpiece
by pressing
handset.
Answer a call
1. When the phone rings the LED
flashes on the handset, press t to
answer the call.
2. Press t again to answer the call
via hands-free.
3. To switch between hands-free and
the earpiece press t.
Note
If auto answer is on, simply lift up the
handset from its base to answer the
call. The default setting is Off.
An incoming call has priority over
other events. Whenever there is an
incoming call, other operations in
progress such as phone settings,
menu navigation, etc. will be ended.
£
, the number
-
/ or /
u
+
on the side of the
Mute
Mute the microphone so that you
can talk to someone else in the room
without your caller hearing you.
During a call, press Mute. The
1.
microphone is muted and
muted is displayed.
Unmute
2. Press
microphone back on.
End a call
Press e or replace the handset on
1.
the base to end the call.
After you hang up, the duration the
phone is off-hook is displayed for 2
seconds.
Note
If auto end call is off you must press
e to end the call. The default setting
is On.
5.1.2 Using the base
Making a call
You can make calls with the base
unit after storing phone numbers in
d
memory keys.
!
1. Press
number is dialed automatically.
Adjust volume
1. During a call, press
the hands-free volume.
Answer a call
1. When the phone rings the LED
flashes on the handset, press
answer the call.
An incoming call has priority over
other events. Whenever there is an
incoming call, other operations in
progress such as playing messages,
will be ended.
h
End a call
1. Press
call.
8
to turn the
@ £
, or on the base, the
-
+
/
on the base to end the
Call
to adjust
h
to