Table of Contents
Advertisement
1.
Getting started
Location
Important
T1I
Do not place your
in the bathroom or other humid areas.
T1I
Place your
base within reach of the mains power and telephone wall socket.
The equipment should be installed near the socket-outlet and should be easily
accessible.
Make sure that it is at least 1 metre away from other electrical appliances
to avoid interference. Your T1I works by sending radio signals between the
handset and base. The strength of the signal depends on where you place the
base. Placing it as high as possible ensures the best signal.
Handset range
The unit has a range of up to 300 metres outdoors when there is a clear line
of sight between the base and handset. Any obstruction between the base
and handset will reduce the range significantly. With the base indoors and the
handset either indoors or outdoors, the range will normally be up to 50 metres.
Thick concrete and stone walls can severely affect the range.
Signal strength
The
on your handset indicates that you are within range of the base. When
out of range of the base,
flashes. If you are on a call, you will hear a warning
beep.
The line will hang up if the handset moves out of range of the base. Move
closer to the base. The handset will automatically reconnect to the base.
Setting up
Important
The base station must be plugged into the mains power at all times. Use only
the power adaptor and telephone line cord supplied with the product.
6
Getting started
Advertisement
Table of Contents
