Modular Emotion User Manual page 70

Alarm table
I
Display
CHAMBER THERMAL
PROTECTION
MOTOR THERMAL
PROTECTION
BOILER THERMAL
PROTECTION
CHAMBER PROBE
DISCHARGE PROBE
BOILER PROBE
CORE PROBE
INVERTER 1
INVERTER 2
INVERTER 3
INVERTER 4
INVERTER 5
LACK OF WATER
COMPONENTS
OVERHEATING
SD ERROR
Description
Safety thermostat in the
chamber triggered
Motor thermal switch
triggered
Boiler safety thermostat
triggered
Chamber probe damaged
Discharge probe damaged
Boiler probe damaged
Core probe damaged
Inverter 1 alarm
Inverter 2 alarm
Inverter 3 alarm
Inverter 4 alarm
Inverter 5 alarm
Lack of water alarm
Control panel
overtemperature alarm
SD memory damaged
Effect
Appliance not working at all
Motor overtemperature
Overtemperature of the boiler
working only partially
Appliance not working at all
Oven can be used only in
Convection mode
Oven can be used with boiler
out of control
Probe cooking cannot be
used
Inverter alarm, electronics
malfunction
Motor overload
Motor phase missing
Inverter overtemperature
No inverter communication
Partial operation mode
Appliance not working at all
Appliance not working at all
Problem solution
Contact an authorized
Service Centre
Switch off, let the oven cool
down and switch back on. If
the alarm continues, contact
a Service Centre
Contact an authorized
Service Centre
Check the cable and the
correct connection of
the probe. If the cable
is damaged contact an
authorized Service Centre
Contact an authorized
Service Centre
Switch off, let the oven cool
down and switch back on. If
the alarm continues, contact
a Service Centre
Contact an authorized
Service Centre
Switch off, let the oven cool
down and switch back on. If
the alarm continues, contact
a Service Centre
Switch the oven off and
back on again. If the alarm
continues, contact a Service
Centre
Check the water connection.
If the alarm continues,
contact a Service Centre
Contact an authorized
Service Centre