Operational Matrix - LaMotte Tracer 1766 Manual

OPERATIONAL MATRIX

Function/
Resulting Action
On/Off
Calibration
Store Reading
Hold Release
Enter Memory
Retrieval
Scroll Stored
Readings
Exit Memory
Retrieval
Clear Stored
Memory
Change
Measurement
Mode
Enter CON/TDS
Ratio
Change CON/TDS
Ratio
Exit CON/TDS
Ratio
Change
Temperature
Units
Power Mode
On or Off Any
On pH or Con
On Any
On Hold
On Any Measurement
Mode
On Memory Recall
On Memory Recall
On Any Memory Mode
On Any
On TDS (ppm or mg/L)
On TDS (ppm or mg/L)
On TDS (ppm or mg/L)
Off Off
Key Press Sequence
Momentary press of ON/OFF
button
Press & hold CAL button for 2
seconds until CAL is displayed
Momentary press of MODE
button
Momentary press of MODE
button
Momentary press of CAL
button followed by a
momentary press of MODE
button within 4 seconds.
Momentary press of MODE
button. Displays last in first
out.
Momentary press of CAL
button
Press and hold the ON/OFF
button for 4 seconds until "clr"
is displayed.
Press and hold the MODE
button for at least 2 seconds
Modes will scroll by until
button is released
Press and release the CAL
button twice in succession
Momentary press of MODE
button. Each press increases
ratio by 0.1 from 0.4 to 1.0.
Momentary press of CAL
button.
Press and hold CAL button
then momentarily press ON/
OFF button. Release CAL
button after "Self Cal" is
displayed.
17