Getting Started - Hall Research Technologies VERSA-4K Series User Manual

VERSA-4K

Getting Started

1. Use Gigabit Switch with IGMPV2 and Jumbo Frame Support
2. Connect Sender(s) and Receiver(s) to the switch. No DHCP server required, by
default Auto IP
3. If switch does not support PoE, use external power supply include in the
package
4. Assign unique
Front Panel
(See Front Panel operation
5. Connect HDMI Source(s) to Sender(s)
6. Connect HDMI Display(s) to Loop out as required
7. Connect HDMI Display(s) to Receiver(s)
8. Connect IR Detector
required
9. If extending bidirectional IR, connect IR Emitter cable to "IR-OUT" port and IR
detector cable to "IR-IN" port of both Sender and Receiver. See
more details.
10. If Using RS-232, connect RS-232 cable from PC or automation system to the
supplied phoenix connector, and then connect it to the "RS-232" port of VERSA.
See Serial over IP
11. To control the unit from WEB-GUI or PC-GUI change the IP address of PC to the
Auto IP network
12. Assign Device Name
8 © Copyright 2019 Hall Research, Inc.
is enabled.
Group ID to each Sender. Group ID can be changed from the
using UP and DOWN arrow keys or by using IR Remote Controller
for more details)
cable to "IR-CTRL" port to use IR Remote Controller as
for more details.
to Sender(s) and Receiver(s) from WEB-GUI or PC-GUI
IR Over IP for