All-in-one console extender dual video, amplified or line-level audio, rs-232, and 3 separate usb extensions: two direct plus one with 4-port hub to 150 meters (500 ft) (20 pages)
Usb 2.0 over utp extender with 2-port hub (8 pages)
Summary of Contents for Hall Research Technologies ULTRA-4K Series
Page 1
User’s Manual Dual 4K UHD HDMI and USB 2.0 ULTRA-4K Extender over 1 CAT6 to 100m/328ft With 3-Port Splitter Sender and Daisy-Chain Receiver ULTRA-4K-S Dual Video + USB Sender with 3-Port Splitter Part Number Function ULTRA-4K-R Dual Video + USB Receiver with Daisy-Chain output UMA1275 Rev n/c Order toll-free in the U.S.
Dual 4K Extender with USB 2.0 1.0 Introduction The ULTRA-4K is comprised of the ULTRA-4K-S Sender and the ULTRA- Product Description 4K-R Receiver. The system is used to extend USB 2.0 and dual display HDMI video (with resolutions up to 4K UHD) to one or more remote locations up to a maximum distance of 100m (328ft) over a single CAT5e/CAT6 cable.
ULTRA-4K Typical Connection Diagram Supports high resolution HDMI video including FHD Features (1920x1080), WQHD (2560x1440), and 4K UHD (3840x2160) • Two video streams and one USB port extended over a single CAT5e/CAT6 cable up to 100m/328ft • Full plug-and-play support with USB keyboard, mouse, and connected peripherals •...
ULTRA-4K DisplayPort Adapters While HDMI is the most widely adopted video standard, there are a number of computer and display manufacturers that rely on DisplayPort for higher resolutions such as 2560 or 4K. Hall Research offers 4K-compatible adapters to convert between these two video standards. NOTE These adapters are unidirectional.
Dual 4K Extender with USB 2.0 4.0 Connector and Indicator Functions ULTRA-4K-S (front) SERVICE: USB-Mini connection, used for upgrading firmware or configuring parameters such as EDID via free PC GUI. USB HUB/PORT 1/PORT 2: LEDs show presence of USB Input and local devices.
USB IN/LOCAL1/LOCAL2: USB Input port, and local outputs. USB IN is ULTRA-4K extended to ULTRA-4K-R USB 1.1/USB 2.0 ports. REMOTE OUTPUTS/LINK 1/LINK 2/LINK 3: Three separate outputs for connection to remote ULTRA-4K-R Receivers. Use CAT5e/CAT6 cable to extend up to 100m/328ft. GREEN LED on left side of ports indicates an active link to ULTRA-4K-R or ULTRA-V-R.
Dual 4K Extender with USB 2.0 ULTRA-4K-R (Rear) HDMI A/HDMI B OUTPUT: Ouputs HDMI from ULTRA-4K-S HDMI A/HDMI B Input ports respectively. USB 1.1/KBRD/MOUSE: Connect keyboard/mouse/other HID input devices to these ports. USB 2.0: These are general purpose ports for other USB devices. If multiple Receivers are in use, these ports must be activated via a USB PAIRING button on the front of the Receiver.
ULTRA-4K 5.0 Troubleshooting If you are experiencing problems getting the ULTRA-4K to work properly, please use the following troubleshooting suggestions. Ensure that all connections are secure. Check all status LEDs to ensure proper operation. • Try resetting the system by unplugging the power supply, waiting 5 seconds and plugging it back.
Dual 4K Extender with USB 2.0 6.0 Specifications Video Standards DVI (single link) HDMI 1.4a video specifications including 12 bit color depth, 3D video HDCP 1.4 Connectors ULTRA-4K-S (2) HDMI Inputs , (2) HDMI Outputs (1) USB-B Host Port, (2) USB-A Device Ports (3) RJ45 Link Outputs (1) 2.0MM Locking DC Power Input ULTRA-4K-R...