Table of Contents
Advertisement
VERSA-4K
In
multicast
mode, a receiver in the group can send an EDID Update Request to replace
Custom EIDD with its attached Sink EDID. A Receiver automatically sends an Update
Request when Display is detected, if "Use this EDID" option is enabled. When multiple
receivers sends an EDID update request, the last received request will be successful. In
multicast scenario it is recommended to enabled "Use This EDID" option on only one
receiver.
Video Scaler
VERA has inbuilt Video Scaler on each Receiver. The Scaler supports Up-scaling (Low
resolution to High Resolution), Down-Scaling (High Resolution to low resolution) and
Timing Conversion (Interlaced to Progressive and vice versa). See
support list
for more information.
The Scaler can be set to "EDID Preferred", which will automatically scale the input video
to the native resolution of the monitor as defined in its EDID. This feature provides the
flexibility to use different kinds of monitors at the Receiver end regardless of brand and
4K resolution support.
Scaler Settings
Output
Pass through
Custom Timing
Timing
EDID Preferred
Video Wall
VERSA receiver has inbuilt video wall support with Bezel and GAP compensation, Pixel
Wise panning, Image Rotation and Mirroring. The Video Wall layout is a rectangular
array of monitors, where the position (x' , y') of a monitor on the Wall is identified with
row and column number. The total number of rows indicates Vertical Monitor Count (Y)
and the total number of columns indicates Horizontal Monitor Count (X).
16
© Copyright 2019 Hall Research, Inc.
Fig 11. EDID Management
Output same resolution as input
See
Resolution Support List
Automatically scales the video to the preferred
EDID timing of the sink
HDMI Video resolution
Advertisement
Table of Contents
