Usb Settings; Keyboard And Mouse - Hall Research Technologies VERSA-4K Series User Manual

USB Settings

VERSA-4K-S
Attached Client IP
(Sender)
Auto Connect to
First Peer
USB Incompatibility
VERSA-4K-R
Connect/Disconnect
(Receiver)
Host IP

Keyboard and Mouse

Unlike USB2.0, Keyboard and mouse are always emulated on the host PC and no explicit
connection requests or driver installation is needed. In multicast mode, a PC can be
controlled using mouse and keyboard from any receiver in the group.
Fig 13. USB2.0 Export Policy
IP Address for connected Receiver
USB will be automatically connected the first
receiver seen in the group (Useful when
there is only one receiver in the group)
Enable when the mouse is responding slow
Initiates USB 2.0 Connect/Disconnect
Request. When multiple receivers send the
request only last received will be served and
others will be disconnected.
IP Address of connected Sender
Fig 14. Keyboard and Mouse Over IP
© Copyright 2019 Hall Research, Inc.
VERSA-4K
21