All-in-one console extender dual video, amplified or line-level audio, rs-232, and 3 separate usb extensions: two direct plus one with 4-port hub to 150 meters (500 ft) (20 pages)
Summary of Contents for Hall Research Technologies FXT-460
Page 1
User’s Manual FXT-460 4K HDMI 2.0 over 1LC Fiber Optic Extender UMA1278 Rev NC CUSTOMER Order toll-free in the U.S. 800-959-6439 FREE technical support, Call 714-641-6607 SUPPORT Hall Research, 1163 Warner Ave. Tustin, CA 92780 INFORMATION www.hallresearch.com...
4K UHD video (4:4:4 with HDR), HDCP 2.0, bidirectional RS-232 and EDID management. The FXT-460-S Sender provides an HDMI input with a corresponding HDMI loop output. The audio component of the HDMI input is extracted and available as both analog (L/R) and Digital SPDIF (TOSLINK) on corresponding connectors (see diagram above).
EDID Emulation with LEARN function 2.0 Package Contents FXT-460-S FXT-460-R (1) Model FXT-460-S (1) Model FXT-460-R (1) 3 position terminal block for RS-232 (1) 3 position terminal block for RS-232 (1) Power supply (1) Power supply (4) Power universal adapter plugs...
HDMI Fiber Optic Extender 3.0 Setup Installation On both the FXT-460-S and FXT-460-R, make sure the SFP modules are fully inserted as they could have become disconnected during shipping. Interconnect the FXT-460-S and FXT-460-R with an LC®/PC fiber optic cable.
HDMI Fiber Optic Extender 4.0 Connector and Indicator Functions FXT-460-S Front Status LEDs ACT – ON means HDMI Input receiving video (active) LINK – ON means fiber optic link to receiver is on Fiber Transmitter Module Connects to fiber optic cable from receiver...
Page 8
RS-232 Terminal Strip Connect to external RS-232 controller. Data flows in direction shown Mini-USB Port Used to update system firmware. FXT-460-S Rear 12V DC Connects to the included power supply Embed Sources – L/R IN and SPDIF IN Connect to compatible digital audio source...
Page 9
HDMI Fiber Optic Extender FXT-460-R Front Fiber Receiver Module Connects to fiber optic cable from transmitter Status LEDs ACT – ON means HDMI Input receiving video LINK – ON means fiber optic link to receiver active RS-232 Terminal Strip Connect to external RS-232 controller. Data flows in direction shown Mini-USB Port Used to update system firmware.
FXT-460 EDID Handling With no SINK attached to the FXT-460-R HDMI OUT connector, the EDID presented to the SOURCE will be emulated from the current EDID stored in the system. 5.0 Troubleshooting If you are experiencing problems getting the system to work properly, please use the following troubleshooting suggestions.
Video Standards DVI (single link) HDMI 1.4 and HDMI 2.0b including 12 bit color depth, 3D video and HDCP 2.2 Connectors FXT-460-S (1) HDMI Input (1) HDMI Output (1) 3.5 mm L/R Audio Output (1) TOSLINK Audio Output (1) Fiber Optic Simplex LC Bidirectional SFP Transmitter...