Related Manuals for Wren Kitchens 200 Tall
Summary of Contents for Wren Kitchens 200 Tall
- Page 1 WALL UNIT 150 - 600 Tall 1 Door Assembly Guide 150 Tall 200 Tall 300 Tall 350 Tall 400 Tall 450 Tall 500 Tall 600 Tall For Internal Use: FI.WR.INS.045_WKIN00130_WALL_150-600_Tall_1Dr_Rev5.indd...
-
Page 2: Before You Start
WALL UNIT BEFORE YOU START 150 - 600 Tall 1 Door INSTALLATION Assembly Guide SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Loose Shelf Frontal x1 Back Panel x2 End Panel x2 Base Panel (packed separately) -
Page 3: Assembly Guide
WALL UNIT 150 - 600 Tall 1 Door Step 1. Seat dowel (F) Assembly Guide into holes in end panel (B) Seat (G) cam dowel as shown. into hole as shown. Step 2. Seat cam dowel (G) into holes in end panel (B) as shown. - Page 4 WALL UNIT 150 - 600 Tall 1 Door Step 6. Seat dowel (F) into holes in Assembly Guide both panels (B) as shown. Seat (G) cam dowel into hole as shown. Step 7. Seat cam dowel (G) into holes in both end panels (B) as shown.
- Page 5 WALL UNIT 150 - 600 Tall 1 Door Step 10. Ensure Carcase is Assembly Guide square. Step 11. Slide the back panel clips (T) into the groove of both panels (B) & (C)s. The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging bracket and corner gussets to be fitted.
- Page 6 WALL UNIT Step 13. 150 - 600 Tall 1 Door Hanging Brackets steps a,b & c to be carried out on both sides as shown Assembly Guide Care to be taken. Hanging procedure is neccesary for a safe installation. Detail A Detail A Detail A Step a...
- Page 7 WALL UNIT Step 16. 150 - 600 Tall 1 Door Measure appropriately and attach the 2 x hanging bracket plates onto the wall screwing through the provided holes into your wall. Assembly Guide Screws for fixing to walls are not provided as these vary depending on your wall material and construction.
- Page 8 WALL UNIT 150 - 600 Tall 1 Door Step 20. Assembly Guide Insert hinge in top & bottom holes as shown. Step 21. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges. Step 22.