Related Manuals for Wren Kitchens Vogue WALL UNIT 1000 Tall 2 Door
Summary of Contents for Wren Kitchens Vogue WALL UNIT 1000 Tall 2 Door
- Page 1 WALL UNIT 1000 Tall 2 Door Assembly Guide 1000 Tall For Internal Use: FI.WR.INS.047_WKIN00132_WALL_1000_2Dr_Tall.Rev6...
- Page 2 WALL UNIT 1000 Tall 2 Door Assembly Guide BEFORE YOU START INSTALLATION SHOULD BE PERFORMED BY A COMPETENT PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED Panel A Panel B Panel C Muntin D Loose Frontal x1 Back Panel x2 End Panel x2 Base Panel Shelf...
- Page 3 Step 2. Step 1. Seat cam dowel (G) Seat dowel (F) into holes in Seat (G) into holes in end panel end panel (B) as shown. Cam Dowel (B) as shown. into hole as shown. Step 3. Attach panels x2 (C) to panel (B), using cam dowels (G) (in blue) and also using dowels (F) (in orange) in...
- Page 4 WALL UNIT 1000 Tall 2 Door Assembly Guide Step 6. Seat dowel (F) into holes in both panels (B) Step 7. Seat (G) as shown. Cam Dowel Seat cam dowel (G) into hole as into holes in shown. both end panels (B) as shown.
- Page 5 Step 10. Ensure unit is square. Step 11. Slide the back panel clips (T) into the groove of both panels (B) & (A). The back panel clips (T) should be evenly spaced as shown and positioned to allow the hanging bracket and corner gussets to be fitted.
- Page 6 WALL UNIT 1000 Tall 2 Door Assembly Guide Care to be taken. Hanging procedure is necessary for a safe installation. Step 14. Hanging Brackets steps a,b & c to be carried out on both sides as shown Detail A Detail A Detail A Step a Step b...
- Page 7 Screws for attaching to walls are not provided as these vary depending on materials, thickness and construction. Ensure appropriate fixings for wall construction are used. Step 17. Measure appropriately and attach the 2 x hanging bracket Hanging Bracket plates onto the wall screwing Plate through the provided holes into your wall.
- Page 8 WALL UNIT 1000 Tall 2 Door Assembly Guide Step 20. Insert hinge in top & bottom holes as shown below. Step 21. Secure hinges by tightening 2 x screws with hinge dowels attached. These are already positioned within the hinges. Step 22.
Need help?
Do you have a question about the Vogue WALL UNIT 1000 Tall 2 Door and is the answer not in the manual?
Questions and answers