Changing The Ring Pattern; Setting A Ring Tone For Incoming Forwarded Calls - Avaya 9600 Series Instruction Manual

Changing the ring pattern

Procedure
1. Press Main menu.
2. Select Options & Settings.
3. Press Select or OK.
4. Select Screen & Sound Options.
5. Press Select or OK.
6. Scroll to Personalized Ringing and press Change.
The ring tone currently selected displays on the status line and a list of all eight ring tones
within that category displays with a checkmark next to the pattern currently selected. The
phone displays the Rich category ring tones by default. The softkey Classic indicates the
other ring tone category, to allow you to switch between categories.
7. If necessary, scroll through the patterns and select one. The phone plays the ring tones
once through the speaker as you scroll through the list. Press OK to listen to selected ring
tone again.
8. Press Change to move from one ring tone to the next.
9. Press Save to save your selection.

Setting a ring tone for incoming forwarded calls

About this task
Use this task to specify the ring tone that you want to hear for incoming calls that are forwarded to
your phone. You can hear the ring tone that you specified for the:
• Caller.
• First phone that forwarded the call.
Procedure
1. Press Avaya Menu .
2. Press Select to select Options & Settings > Screen & Sound Options > Call Fwd Ring.
3. Press Change to select one of the following:
• Caller: To hear the ring tone that you specified for the caller.
• Forwarder: To hear the ring tone that you specified for the first phone that forwarded the
call.
4. Press Save.
October 2019 Using Avaya 9601 IP Deskphone SIP
Comments on this document? infodev@avaya.com
Customizing Settings
81