Brake Adjustment - HASE Bikes Lepus User Manual/Maintenance

Brake adjustment

Renewing brake pads - rear:
If the brake pads are worn, they must be renewed immediately.
Otherwise damage to the brake disc may occur.
For this reason please make regular checks, especially if you notice a
different braking sound.
The procedure for renewing the brake pads can be found in the
manufacturer's operating instructions included.
To renew the brake pads on the Lepus, it is easier to remove the caliper
instead of the wheel.
Adjustment:
The distance of the brake to
the frame can be adjusted by
placing washers between
discbrake mount and caliper. It
is also possible to move the
axle unit by loosening the
clamp bolts. Following this, the
gears will need adjusting.
Further details can be found in the brake manufacturer's
operating instructions included
38
Page