Suspension - HASE Bikes Lepus User Manual/Maintenance

Seat height adjustment, rear shock
Seat height adjustment
Your trike has the best handling properties when the track is adjusted
optimally. But you still have the oportunity to adjust the seat height by
turning the adjusting bolt in and out (high or low position). After
changing the seat height, you need to adjust the track and the basket, like
shown on the next page. Once complete, secure it with the lock nut.
Heavy riders can cause the suspension to knock on the frame. In this
case, move the adjusting bolt in until the knocking ceases.
How to use your rear shock
able from your local bike shop)
Please use a specific shock pump (avail
to increase or decrease air pressure in the shock to your desired
rate. Correctly adjusted, the shock should compress ( sag )
approximately 15% of its total travel while the rider is seated.
Keep the shock clean and wipe dust off regulary
presure: min. 5 bar; max. 10,5 bar
Adjusting Bolt
Valve
High position
34
Page