Track; Mudguard Adjustment - HASE Bikes Lepus User Manual/Maintenance

Track adjustment, Mudguard adjustment
When adjusting the seat hight, there
is a change to the angle of the Lepus
rear- frame in relation to the ground.
Because the rear wheels are set at an
angle, the track must be readjusted.
Track adjustment
Lose the hub holder clamps first
When adjusting the seat in a higher
position: rotate the toe adjustment anti-
clockwise. When lowering the seat
position: rotate them clockwise.
Per cm seathightadjustment the toe
adjustments (left and right) have to
rotate two turns each.
For controlling you can measure the
distance in the middel of the wheel
(red arrows). They must be the same
(tolerance +/- 4mm)

Mudguard adjustment

to readjust the fenders / basket to
different seat heights, the 3 M 6 Bolts
( A ) have to be loosenend. The fender
brackets ( B )
can then be moved to a horizontal
position parallel to the ground.
To adjust the distance of the fenders to
the tires, the two front bolts have to be
loosend.
(B) (A)
35
Page