Mechanical Specifications; Power Supply Specifications - HPE Edgeline EL8000 Setup And Configuration Manual

Converged edge system
Table of Contents

Advertisement

Table 3: Extended Edgeline specifications
Specification
Temperature range
Operating
Nonoperating
Relative humidity (noncondensing)
Operating
Non-Operating
1
All temperature ratings shown are for sea level. An altitude derating of 1.0°C per 305 m (1.8°F per 1,000 ft) to 3,048 m (10,000 ft) is
applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). No restrictions on product configurations
except for rotating hard drives. PCI cards must be rated for continuous operation with 60°C cooling air. Solid-state drives must be rated for
continuous operation with 65°C cooling air. Not rated for operation over 3,030 m (10,000 ft).

Mechanical specifications

Specification
Height
Depth
Width
Weight
With two 2U e910 server blades installed
With one 2U and two 1U e910 server blades
With four 1U e910 server blades installed

Power supply specifications

Depending on installed options, the system is configured with one of the following power supplies:
1500W Hot Plug Power Supply
1500W -48VDC Hot Plug Power Supply
For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise website (http://
www.hpe.com/info/proliant/powersupply).
1
Value
0°C to 55°C (32°F to 131°F)
-30°C to 60°C (-22°F to 140°F)
8% to 90% at 28°C (82.4°F) maximum wet bulb temperature
5% to 95% at 38.7°C (101.7°F) maximum wet bulb
temperature
Value
21.6 cm (8.5 in) for 5U
43.18 cm (17 in)
22.1 cm (8.7 in)
52 lbs
55 lbs
58 lbs
Specifications
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents