Power Problems; Hpe Edgeline 1500 Cm Module Powers On Without Being Fully Inserted To The Chassis - HPE Edgeline EL8000 Setup And Configuration Manual

Action
Reconfigure the chassis manager on the new chassis.

Power problems

HPE Edgeline 1500 CM module powers on without being fully inserted to the chassis

Symptom
The HPE Moonshot 1500 CM module powers on without being fully inserted to the chassis. If the CM is not fully inserted, it
may cause the fan to make load noise and the CM fails to communicate with the cartridges.
Action
Make sure that the CM is fully inserted. Open the latch fully then press the CM in fully, then close the latch.
Troubleshooting 39