Installing The Four-Post Rack Mount Kit - HPE Edgeline EL8000 Setup And Configuration Manual

c. Secure the chassis with two screws on the rear.

Installing the four-post rack mount kit

Two mounting locations are available for the four-post rack mounting:
• Forward chassis rack mount- This mounting position is preferred when the cables connected to the chassis are at the rear
of the rack.
• Rear chassis rack mount- This mounting position is preferred when the cables connected to the chassis are at the front of
the rack. For this mounting option, the chassis is recessed in the rack.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
Rack mount option 17