Installing The Server Blade Into The Chassis - HPE Edgeline EL8000 Setup And Configuration Manual

Procedure
1. Power down the system.
2. If locked, unlock the server blade.
3. Press and open the blade latch.
4. Remove the server blade.

Installing the server blade into the chassis

The HPE Edgeline EL8000 Converged Edge chassis supports HPE ProLiant e910 Server Blade. Permissible server blades
configurations:
• Up to four 1U server blades
• Up to two 2U server blades
• Up to one 2U and two 1U server blades
22 Associated hardware procedures