Adding Components To The Edgeline El8000 Chassis Manager Repository; Installing A Component From The Edgeline El8000 Chassis Manager Repository; Managing Chassis Power And Resetting Edgeline El8000 Chassis Manager - HPE Edgeline EL8000 Setup And Configuration Manual

Adding components to the Edgeline EL8000 Chassis Manager Repository

Prerequisites
Edgeline EL8000 Chassis Manager Admin privilege
Procedure
1. Click Firmware in the navigation tree, and then click Upload to Repository in the right pane.
2. Select the Local file or Remote file option.
3. Depending on the option you selected, do one of the following:
a. In the File box, click Browse (Internet Explorer, Edge, or Firefox) or Choose File (Chrome), and then specify the location
of the firmware component.
b. In the URL box, enter the URL for a firmware component on an accessible web server.
4. Click Upload.
The file is uploaded to the repository and displayed in the repository contents list.
IMPORTANT: Do not exceed the repository storage capacity. Exceeding the storage capacity will force all open
sessions to the Edgeline EL8000 Chassis Manager to log out. If this happens, log in again and delete stored files until
the repository storage is below the maximum capacity.

Installing a component from the Edgeline EL8000 Chassis Manager Repository

You can install new firmware from the Edgeline EL8000 Chassis Manager Repository page.
Prerequisites
Edgeline EL8000 Chassis Manager Admin privilege
Procedure
1. Click Firmware in the navigation tree, and then click Repository.
2. Click the install component icon
3. Click Yes, install now.
The update begins immediately.
Managing chassis power and resetting Edgeline EL8000 Chassis
Manager
Prerequisites
Edgeline EL8000 Chassis Manager Admin privilege
Procedure
1. Click Power and Thermal in the navigation tree, and then click the Management Power tab.
2. To reset the chassis manager power supply, click Auxiliary Reset, and then click Yes, Reset Now.
next to the component you want to install.
Configuration 33