Prepare The System For Daily Use; Registering The Product - HPE Edgeline EL8000 Setup And Configuration Manual

Converged edge system
Table of Contents

Advertisement

Resetting the chassis manager power supply resets all chassis manager components, including the Ethernet switch
connection to the blade iLO processors. An auxiliary reset causes a short disruption to the internal management and
production networks, but does not affect blade power.
3. To reset the Edgeline EL8000 Chassis Manager, click Reset EL8000CM, and then click Yes, Reset Now.
Using the Reset option does not make any configuration changes, but ends all active connections to the firmware. If a
firmware file upload is in progress, it is terminated. If a firmware flash is in progress, you cannot reset until the process is
finished. Wait a few minutes before attempting to log in to a new session.

Prepare the system for daily use

Prepare your new system for service by completing the following tasks.
The details for these tasks can be found in the HPE Edgeline EL8000 Converged Edge System Chassis Manager User Guide at
http://www.hpe.com/support/EL8000-CM-UserGuide-en.
Access Edgeline EL8000 Chassis Manager from practically anywhere, or use a link on the Blades page to access the host
operating system using iLO Remote Console (after acquiring an iLO Advanced license).
Add authorized user accounts in Edgeline EL8000 Chassis Manager on the User Administration page.
NOTE: The default Administrator account cannot be deleted.
Add SSH keys for each user on the Security page.
Replace the default self-signed certificate and create a trusted SSL certificate for Edgeline EL8000 Chassis Manager on the
SSL Certificate page.
Control the system and chassis power, and view temperatures, from the Power and Thermal pages.
Back up the Edgeline EL8000 Chassis Manager configuration on the Backup & Restore page.
Troubleshoot system issues by viewing the Health and Event logs on the Logs page.

Registering the product

To experience quicker service and more efficient support, register the product at the Hewlett Packard Enterprise Product
Registration website.
34
Configuration

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents